Sneaki

High Site:	Sneaki
SSID:	http://ctwug.za.net/sneaki
WIND:	Sneaki
Head Admin:	Sneaki
Co Admins:	Ogon
Location:	Goodwood
Back Bone Links:	Mars, KM

Sneaki

In the beginning it was just to be connected to the CTWUG but I found this was not enough. I have learnt a lot from the CTWUG experience and would like to pass this onto other people as well. This node was setup in November 2011 with the main goal of getting more wuggers to join in the CTWUG community. Currently trying to get two backbone links running and also got a 5.8GHz sector for clients to connect to. Of course if you are thinking of connecting to this node please note the idea is to expand and create more links, hence i hope the connectees will follow course.

Check out our website http://km.ctwug.za.net (wug only access)

KM, KMSquare, AirWolf and most of Goodwood area form a community within the CTWUG called the KM Group.

KM Group Services:
DC Hub - kmhub.ctwug.za.net
TeamSpeak Server - kmts.wolf.ctwug.za.net

Sneaki RB interfaces

Main links

Sneaki - Mars

BB: Dynadish 5.8GHz unit
SSID: http://ctwug.za.net/Mars12

Sneaki - KM

BB: Dynadish 5.8GHz unit
SSID: http://ctwug.za.net/sneaki9

Sneaki - IAlloy

BB: 16dbi 5.8GHz SXT unit
SSID: http://ctwug.za.net/sneaki3

Sneaki - OPEN interface

BB: 27dBi R52nM MikroTik radio 5.8Ghz Vertical grid
SSID: sneaki-test-bb

Sneaki - Pierre

BB: 24dBi R52nM Groove MikroTik radio 5.8Ghz Vertical grid
SSID: http://ctwug.za.net/sneaki4

Sneaki - Yeti-NE

BB: 24dBi R52nM 433 MikroTik radio 5.8Ghz Vertical grid
SSID: sneaki-yeti-ne

Access Point 1

AP: 5.8Ghz 120° Vertical sector covering Goodwood south
SSID: http://ctwug.za.net/sneaki-ap1

Band 5GHz-A
Frequency 5865
Wireless protocol - NV2 nstreme (during test scans keep wireless protocol as "Any")
Frequency Mode superchannel
Nstreme is enabled

Clients

Access Point 2

AP: 5.8Ghz 120° Vertical sector covering Goodwood east
SSID: http://ctwug.za.net/sneaki-ap2

Band 5GHz-A/N
Frequency 5200
Wireless protocol - NV2 nstreme (during test scans keep wireless protocol as "Any")
Frequency Mode manual-txpower
Nstreme is enabled

Clients

Access Point 3

AP: Panel covering Goodwood north
SSID: http://ctwug.za.net/sneaki-ap3

Band 5GHz-A
Frequency 5180
Wireless protocol - NV2 nstreme (during test scans keep wireless protocol as "Any")
Frequency Mode manual-txpower
Nstreme is enabled

Clients

Yster

IP's

Usage Range 172.18.230.0/25

**IP Sub Ranges**
IP Range	Allocated to	Network IP	RB IP	Broadcast IP	Usable IPs	Status
172.18.230.48/29	Kockott	172.18.230.48	172.18.230.54	172.18.230.55	6	Active
172.18.230.56/29	Yster	172.18.230.56	172.18.230.62	172.18.230.63	6	Active
172.18.230.66/29	Unallocated	172.18.230.66	172.18.230.72	172.18.230.73	6	Available
172.18.230.72/29	Deharmonic	172.18.230.72	172.18.230.78	172.18.230.79	6	Active
172.18.230.80/29	Unallocated	172.18.230.80	172.18.230.86	172.18.230.87	6	Available
172.18.230.88/29	Django	172.18.230.88	172.18.230.94	172.18.230.95	6	Active
172.18.230.96/29	Callisto	172.18.230.96	172.18.230.102	172.18.230.103	6	Active
172.18.230.104/29	jacquesvdw	172.18.230.104	172.18.230.110	172.18.230.111	6	Active
172.18.230.112/29	Unallocated	172.18.230.112	172.18.230.118	172.18.230.119	6	Reserved
172.18.230.120/29	Unallocated	172.18.230.120	172.18.230.126	172.18.230.127	6	Reserved

RB Availibility

rb3 device two ether ports open
rb6 device two ether ports open and two interface cards open

Wug Log

Aug 2011	Started the project, connected to KM Node (grid to sector)
Sep 2011	Connected to Steamer, grid to panel
Oct 2011	Added new 31 dbi grid for new backbone (testing)
Nov 2011	Added grid on steamer side, grid to grid
Dec 2011	Testing to Johnny node for new backbone
Jan 2012	Add direct current to routerboard to increase output. Re-aligned to 31dbi grid for line of sight to Johnny Re-aligned sector for clients to test for los.
Feb 2012	Placed N-cards in steamer gear for greater speeds. Alignment done for Johnny or IO. Groove added for a possible link to theG. OSPF added as well as scripts to allow for clients to connect (not enabled yet).
March 2012	Convered with admins at km meeting and they are happy with the current backbone. Sector will be activated and start accepting clients once the settings have been inserted. Added Loskop as the first client to the sector.
May 2012	Connected to Yeti and completed my winch system for my mast. Maintenance will be much easier now and the mast can stand fully above the roof. IAlloy joined onto the wug - sxt to grid Bought a 751G 2.4 Ghz and started running ospf on it as backbone router
Jun 2012	Connect Yen via lan cable
Jul 2012	upgraded 31 dbi grid to 24 dbi Dish Upgrade box to a Alluminium box to reduce interference from external sources. IAlloy upgraded his end so sxt to sxt link now.
Aug 2012	Updated mars link to allow a link between sneaki and mars Sneaki to Mars link running. Starting running pilgrim's qos scripts to improve overall stability of the link. Upgrade power to an open frame transformer.
Nov 2012	Alignment to Mars highsite was done to get link stable Grinder new client has connected to sector. Pilgrim's QoS are not running on the CTWUG anymore
Dec 2012	Mars gets a 31 dbi Dish to the sneaki -> mars link
July 2013	New toughswitch added to supply power to interfaces a more effeciently
Oct 2013	New ip range and infrastructure re-config
Nov 2013	Bought a UPS to make sure highsite is online when power goes off and to smooth out current to the site rbs
Dec 2013	Added gear to create link to Yeti-Ne node
Jan 2014	Bracket completely broke off from the weight of the gear. Installed a new bracket and updated the pulley system. Added new Nanobridge to Yeti. Groove will move to new backbone link.
Sep 2015	Made new connection to Pierre with groove
Nov 2015	Replaced rb to rb433 gear for link to Yeti-Ne node
Dec 2015	Started solar system to move wug gear to free energy
Jan 2016	Added rb8 to another mast. Django connected to rb 8
Sep 2016	Added sector to rb8 on alternative mast. Rb8 ready for more clients
Dec 2016	Added jacquesvdw to sector one
Mar 2017	Dish pointing to Mars upgraded to Dynadish. Old Dish open for new backbone. Two interfaces migrated to solar system.
May 2017	Added new dynadish pointing to KM. RB6 upgraded to include old Panel for clients facing from the north.
June 2017	Moved KM Dynadish to top of pole, additional aligment was done and OSPF has been enabled. Pierre grid was moved down to prioritize KM backbone link.